Commercial EV Charging
For North America, Europe & Australia

Commercial AC and DC charging platforms for operators, fleets, distributors and site owners. North America, Europe and Australia are our priority markets. Choose a product family, then confirm connector, electrical input and documentation by model.

Charging Products for Priority Markets

North American DC models are ETL-certified (30–240 kW); European DC models are TÜV-certified (30–320 kW). AC input options, connectors and compliance scope vary by model.

Commercial AC Series

Commercial AC charging for workplace, fleet and destination sites. Current product input options include North America: single-phase 208–240 V; Europe: single-phase 220 V or three-phase 380 V. Match the selected model to site supply. OCPP 1.6J is supported across products.

DC Fast Charging

North America: ETL-certified DC models from 30–240 kW. Europe: TÜV-certified DC models from 30–320 kW. Connector, electrical input, power output and certification scope vary by model. Request the current datasheet for the selected configuration.

OEM & Customization

OEM/ODM options can include branding, enclosure and interface changes. Feasibility, software scope, sample timing and order requirements are confirmed for each project.

Market-Specific Documentation

Certification scope varies by model and destination market. Ask us for the applicable documents.

Why LinkPower?

Project Terms Made Clear — From Sample to Service

LinkPower supports commercial AC and DC charging projects for North America, Europe and Australia. Share your application, target models and quantity so the team can confirm the relevant technical documents, sample plan and delivery scope.

30–320 kW

Europe · TÜV-certified DC models

30–240 kW

North America · ETL-certified DC models

OCPP 1.6J

Supported across all products

2 Years

Standard product warranty

Authorized EV Charging Projects Across Markets

Explore LinkPower project references across fleet, public charging, parking and commercial sites. Product ratings and configurations are project-specific; ask us for the model documents relevant to your deployment.

-30°C PROOF

Oslo, Norway

Nordic Public Transport Hub

Reliable AC OperationEngineered for Extreme Cold

Ultra-Rugged DesignAll-Weather Protection

FLEET HUB

California, USA

DHL Logistics Depot Phase II

60kW-240kW DCUltra-Fast Charging

IP65 & IK10 RatedMaximum Protection

INDOOR KIT

Dubai, UAE

Dubai Mall Underground

Pillar KitMounting

High Temp.Tested

RFID AUTH

Madrid, Spain

Residential Secured Charging

NFC/RFIDAccess

BillingApp API

DOOH AD

New York, USA

Times Square Media Screen

55" 4KDisplay

DisplayDigital signage option

Commercial

Hong Kong, China

Commercial Parking Lot

MaterialMetal

SolidDurable

Load More Projects

Compliance & Quality

Model-Specific Certifications & Documents

North American DC models (30–240 kW) are ETL-certified; European DC models (30–320 kW) are TÜV-certified. Certificates and test reports are available on request; test reports are not generally published on the website. Scope depends on model. Contact us to confirm Australian configurations and local requirements.

Solutions for Commercial Charging Projects

Choose charging equipment around your site power, vehicle dwell time, connector, payment and backend requirements. We confirm product-market fit and supporting documentation by model.

Build Profitable Charging Network

For Charge Point Operators (CPOs), Uptime = Revenue. Our DC fast chargers are engineered with modular power units to ensure 99.5% availability. Fully compatible with OCPP 1.6J/2.0.1 CMS for seamless remote management and monetization.

Cut Operational Costs (TCO) by 30%

Electrifying your logistics or taxi fleet shouldn’t break the grid. Our Smart Dynamic Load Balancing (DLB) optimizes power distribution, allowing you to charge more vehicles simultaneously without expensive transformer upgrades.

Attract High-Value Customers & Tenants

Turn your parking lot into a destination charging hub. EV drivers spend longer in malls and hotels while charging. Our AC & DC chargers with optional 55-inch advertising screens create a new revenue stream for your property.

Launch Your EV Charger Brand in 4 Weeks

Skip the R&D costs. As a verified manufacturer, we offer end-to-end White Label (OEM) services. From custom enclosure colors and logo laser printing to localized packaging, we help distributors dominate their local market.

Orders, Samples & Support

OCPP 1.6J is supported across LinkPower products; OCPP 2.0.1 is being upgraded. Standard warranty is 2 years. Sample timing, minimum order and after-sales scope are shown below.

Certification by market

ETL · TÜV

North American DC: 30–240 kW ETL-certified models. European DC: 30–320 kW TÜV-certified models. Certificates and test reports are available on request.

Connectivity

OCPP 1.6J

Supported across LinkPower products. OCPP 2.0.1 is being upgraded; confirm available firmware and backend compatibility for your model.

POS payment

Payter · Nayax · PAX

Supported on selected models. Additional payment-terminal integrations require software work and project validation.

Standard warranty

2 years

After-sales support is primarily provided through replacement parts. Confirm warranty coverage and parts scope in the quotation.

Typical sample preparation

AC ~2 weeks · DC ~4 weeks

Preparation timing depends on the selected model and configuration; confirm the schedule before ordering.

Standard minimum order

AC 100 · DC 10

Standard MOQ is 100 units for AC chargers and 10 units for DC chargers. Confirm project-specific terms with the sales team.

Compatible With All Major EV Brands

Support Center

Frequently Asked Questions

Everything you need to know about our manufacturing process, customization options, and shipping policies.

1.Do you support Dynamic Load Balancing (DLB) for fleets or apartments?

Power-sharing behavior depends on the charger model. On the DD240, two vehicles charging simultaneously receive 120 + 120 kW; dynamic reallocation is not currently supported. Confirm load-management features for other products and site configurations.

2. Can I integrate Credit Card Terminals (POS) for public charging revenue?

Selected charger models support Payter, Nayax and PAX POS terminals. Additional terminals require software integration work. Tell us your target market and payment setup so we can confirm model compatibility.

3:Can I customize the Charging Interface (HMI/UI) beyond just the logo?

Branding and interface options depend on the product model and OEM/ODM scope. Share your requirements so we can confirm feasibility and software work.

4: Do you provide technical training for my installation/maintenance team?

After-sales support is primarily provided through replacement parts. Product manuals and other support arrangements are confirmed for the selected model and order.

5: Can I get a Sample Unit for internal testing and CMS integration validation?

Sample preparation is typically 2 weeks for AC chargers and 4 weeks for DC chargers. OCPP 1.6J is supported across products; OCPP 2.0.1 is being upgraded. Confirm availability, shipping time and backend compatibility for the selected model.

Knowledge Hub